Texas Assessments of Academic Readiness (STAAR) for Fourth Grade Math

Evaluate Open SentencesAlgebra is a study of the properties of operations on numbers. Algebra generalizes math by using symbols or letters to represent numbers. Read more...iWorksheets: 3Study Guides: 1Vocabulary Sets: 1
Pattern BlocksA fraction is a part of a whole of something. Read more...iWorksheets: 3Study Guides: 1
PatternsA pattern is a recognizable, consistent series of numbers, shapes, or images. Read more...iWorksheets: 4Study Guides: 1
ProbabilityProbability word problems worksheet. Probability is the chance of whether something will happen or not. If two things have an EQUAL chance of happening, they have the SAME probability. If there are MORE chances of something happening (A) than something else (B), that means there is a HIGHER PROBABILITY of that something (A) happening. Read more...iWorksheets: 3Study Guides: 1
Problem SolvingWhat Is Problem Solving? Problem solving is finding an answer to a question. How to Problem Solve: Read the problem carefully. Decide on an operation to use to solve the problem. Solve the problem. Check your work and make sure that your answer makes sense. Read more...iWorksheets: 14Study Guides: 1
DecimalsREADING, WRITING, COMPARING, AND ORDERING DECIMALS Read more...iWorksheets: 5Study Guides: 1Vocabulary Sets: 1
PerimeterPerimeter is the distance around the outside of an object. Read more...iWorksheets: 10Study Guides: 1Vocabulary Sets: 1
CoordinatesYou can use a pair of numbers to describe the location of a point on a grid. The numbers in the pair are called coordinates. Read more...iWorksheets: 3Study Guides: 1
Data AnalysisAnalysis of data is a process of inspecting, cleansing, transforming, and modeling data with the goal of discovering useful information. Read more...iWorksheets: 10Study Guides: 1Vocabulary Sets: 1
MoneyFreeWhat Is Making Change? Making change means giving money back to someone after they have made a purchase and paid more than they owed. This is done using banknotes and coins. You can subtract, add, multiply, and divide money when making change. Read more...iWorksheets: 10Study Guides: 1

TX.STAAR.4. STAAR Grade 4 Mathematics Assessment

Reporting Category 1: Numbers, Operations, and Quantitative Reasoning - The student will demonstrate an understanding of numbers, operations, and quantitative reasoning.

(4.1) Number, operation, and quantitative reasoning. The student uses place value to represent whole numbers and decimals. The student is expected to:
4.1 (A) Use place value to read, write, compare, and order whole numbers through 999,999,999. Supporting Standard (STAAR)
Exponential & Scientific NotationExponential notation is shorten way of expressing a large number using exponents. Read more...iWorksheets :6Study Guides :1Vocabulary :1
AlgebraComparing whole numbers, fractions, and decimals means looking at the values of two numbers and deciding if they are greater than, less than or equal to each other. Read more...iWorksheets :4Study Guides :1
Whole Numbers to MillionsA whole number is a number without fractions. Read more...iWorksheets :5Study Guides :1Vocabulary :1
Compare and Order NumbersComparing two numbers and deciding which one is greater Read more...iWorksheets :3Study Guides :1
Greater Than/Less ThanIf a number is greater than another number that means it is higher in value than the other number. If a number is less than another number that means it is lower in value than the other number. Read more...iWorksheets :4Study Guides :1
Ordering and Comparing NumbersWhen you order numbers, you are putting the numbers in a sequence from the smallest value to the largest value. When you compare two numbers, you are finding which number is larger or smaller than the other. Read more...iWorksheets :5Study Guides :1Vocabulary :1
Compare and Order NumbersWhat is comparing and ordering numbers? Ordering numbers means listing numbers from least to greatest, or greatest to least. Comparing numbers means looking at the values of two numbers and deciding if the numbers are greater than, less than, or equal to each other. Read more...iWorksheets :4Study Guides :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
Place ValueWhat Is Place Value? In our decimal number system, the value of a digit depends on its place, or position, in the number. Beginning with the ones place at the right, each place value is multiplied by increasing powers of 10. Read more...iWorksheets :4Study Guides :1Vocabulary :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1
Greater Than/Less ThanWhat Is Greater Than and Less Than? When a number is greater than another number, this means it is a larger number. The symbol for greater than is >. When a number is less than another number, this means it is a smaller number. The symbol for less than is <. Read more...iWorksheets :6Study Guides :1
Expanding NumbersWhat Are Expanding Numbers? An expanding number is taking a larger number apart and showing each number’s total value. Number 5398 in expanded form is 5000 + 300 + 90 + 8. Read more...iWorksheets :3Study Guides :1
Number Words and Place ValueWhen we write numbers, the position of each digit is important. Each position is 10 more than the one before it. So, 23 means “add 2*10 to 3*1″. In the number 467: the "7" is in the Ones position, meaning 7 ones, the "6" is in the Tens position meaning 6 tens, and the "4" is in the Hundreds position. Read more...iWorksheets :3Study Guides :1
4.1 (B) Use place value to read, write, compare, and order decimals involving tenths and hundredths, including money, using concrete objects and pictorial models. Readiness Standard (STAAR)
Ordering DecimalsWhen putting decimals in order from least to greatest, we must look at the highest place value first. Read more...iWorksheets :7Study Guides :1Vocabulary :1
Fractions/DecimalsHow to convert fractions to decimals: Divide the denominator (the bottom part) into the numerator (the top part). Read more...iWorksheets :3Study Guides :1
Add/Subtract/Multiply/Divide DecimalsYou add/subtract/multiply/divide decimals the same way you add/subtract/multiply/divide whole numbers BUT you also need to place the decimal in the correct spot. When multiplying decimals, the decimals may or may NOT be lined up in the multiplication problem. Read more...iWorksheets :10Study Guides :1Vocabulary :1
Less Than, Greater ThanCompare fractions and decimals using <, >, or =. Read more...iWorksheets :3Study Guides :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1
(4.2) Number, operation, and quantitative reasoning. The student describes and compares fractional parts of whole objects or sets of objects. The student is expected to:
4.2 (A) Use concrete objects and pictorial models to generate equivalent fractions. Supporting Standard (STAAR)
Equivalent FractionsEquivalent fractions are fractions that have EQUAL value. Read more...iWorksheets :5Study Guides :1Vocabulary :1
Fractions/DecimalsHow to convert fractions to decimals: Divide the denominator (the bottom part) into the numerator (the top part). Read more...iWorksheets :3Study Guides :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1
FractionsThe top number of a fraction is called the numerator. It shows how many pieces of a whole we are talking about. The bottom number is called the denominator. It shows how many pieces an object was divided into, or how many total pieces we have. Read more...iWorksheets :4Study Guides :1
4.2 (B) Model fraction quantities greater than one using concrete objects and pictorial models. Supporting Standard (STAAR)
Add/Subtract FractionsFreeis one of the four basic operations of arithmetic, with the others being subtraction, multiplication and division. The addition of two whole numbers is the total amount of those quantities combined. Read more...iWorksheets :3Study Guides :1
Simplify FractionsSimplifying fractions means to make the fraction as simple as possible. Read more...iWorksheets :4Study Guides :1Vocabulary :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1
4.2 (C) Compare and order fractions using concrete objects and pictorial models. Supporting Standard (STAAR)
Compare and Order FractionsWhen comparing two fractions that have a common denominator, you can looks at the numerators to decide which fraction is greater Read more...iWorksheets :4Study Guides :1Vocabulary :1
Ordering FractionsA fraction consists of two numbers separated by a line - numerator and denominator. To order fractions with like numerators, look at the denominators and compare them two at a time. The fraction with the smaller denominator is the larger fraction. Read more...iWorksheets :3Study Guides :1
Fractions/DecimalsHow to convert fractions to decimals: Divide the denominator (the bottom part) into the numerator (the top part). Read more...iWorksheets :3Study Guides :1
Comparing FractionsWhen comparing fractions, you are finding which fraction is greater and which fractions is less than the other. Similar to comparing numbers, there are symbols to use when comparing fractions. Read more...iWorksheets :5Study Guides :1Vocabulary :1
Less Than, Greater ThanCompare fractions and decimals using <, >, or =. Read more...iWorksheets :3Study Guides :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1
Equivalent Fractions to 1/2Fractions that are equivalent to ½ are fractions that have different denominators than ½, but still show half. Fractions that are equivalent to ½ can be simplified to ½. Fractions equivalent to ½ have an even number as their denominator. Read more...iWorksheets :3Study Guides :1
FractionsThe top number of a fraction is called the numerator. It shows how many pieces of a whole we are talking about. The bottom number is called the denominator. It shows how many pieces an object was divided into, or how many total pieces we have. Read more...iWorksheets :4Study Guides :1
4.2 (D) Relate decimals to fractions that name tenths and hundredths using concrete objects and pictorial models. Readiness Standard (STAAR)
PercentsA percentage is a number or ratio expressed as a fraction of 100. Read more...iWorksheets :6Study Guides :1Vocabulary :1
Decimals/FractionsExpress decimals as an equivalent form of fractions to tenths and hundredths. Read more...iWorksheets :5Study Guides :1Vocabulary :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1
(4.3) Number, operation, and quantitative reasoning. The student adds and subtracts to solve meaningful problems involving whole numbers and decimals. The student is expected to:
4.3 (A) Use addition and subtraction to solve problems involving whole numbers. Supporting Standard (STAAR)
3 Digit AdditionFreeAdding large numbers involves breaking the problem down into smaller addition facts. Read more...iWorksheets :4Study Guides :1
3 Digit SubtractionWhat Is Three-Digit Subtraction? We subtract to compare numbers. We are able to find the difference between numbers through subtraction. We use subtraction to find out how much more we have or how much smaller something is in comparison to another number. Read more...iWorksheets :3Study Guides :1
Commutative PropertyThe commutative property of addition says that we can add numbers in any order and get the same sum. Read more...iWorksheets :3Study Guides :1
Multi-step Word ProblemsSome word problems require more than one step to solve. These are called multi-step word problems. Read more...iWorksheets :4Study Guides :1
Commutative/Associative PropertiesUsing the Commutative Property in addition means that the order of addends does not matter; the sum will remain the same. Read more...iWorksheets :3Study Guides :1
4 Digit AdditionFreeAdding four digit numbers. Read more...iWorksheets :3Study Guides :1
Double Digit SubtractionWhat Is Double Digit Subtraction? Double digit subtraction is taking a number with two digits (ex. 23) and subtracting it from another two digit number (ex. 33). The answer is known as the difference. Read more...iWorksheets :4Study Guides :1
Addition/SubtractionAddition is combining two or more numbers. The term used for addition is plus. When two or more numbers are combined they form a new number called a sum. Subtraction is “taking away” one number from another. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :11Study Guides :1
Double Digit AdditionWhat Is Double Digit Addition? Double digit addition is taking a two digit number (ex. 32) and adding it to another two digit number (ex. 27). The answer of these two addends is known as the sum. Read more...iWorksheets :4Study Guides :1
RegroupingWhat Is Regrouping? Regrouping in addition is used when the sum of the ones place is larger than nine. The tens place of the sum is moved to the top of the tens place column to be added with the others. Read more...iWorksheets :3Study Guides :1
Associative PropertyAssociative Property of Addition explains that when three or more numbers are added, the sum is the same regardless of the order in which the numbers are grouped and/or added. Read more...iWorksheets :3Study Guides :1
Word ProblemsWhat Are Story Problems? Story problems are a bunch of sentences set up to give you information in order to solve a problem. Story problems most often give you all the information needed to solve the problem. They may even include information you do not need at all. Read more...iWorksheets :15Study Guides :1
4.3 (B) Add and subtract decimals to the hundredths place using concrete objects and pictorial models. Supporting Standard (STAAR)
Add/Subtract DecimalsAddition and subtraction of decimals is like adding and subtracting whole numbers. The only thing we must remember is to line up the place values correctly. Read more...iWorksheets :14Study Guides :1Vocabulary :1
Add/Subtract/Multiply/Divide DecimalsYou add/subtract/multiply/divide decimals the same way you add/subtract/multiply/divide whole numbers BUT you also need to place the decimal in the correct spot. When multiplying decimals, the decimals may or may NOT be lined up in the multiplication problem. Read more...iWorksheets :10Study Guides :1Vocabulary :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1
(4.4) Number, operation, and quantitative reasoning. The student multiplies and divides to solve meaningful problems involving whole numbers. The student is expected to:
4.4 (B) Represent multiplication and division situations in picture, word, and number form. Supporting Standard (STAAR)
MultiplicationMultiplication is one of the four elementary, mathematical operations of arithmetic. Read more...iWorksheets :7Study Guides :1Vocabulary :1
Odd/EvenA number can be identified as odd or even. Odd numbers can't be divided exactly by 2. Read more...iWorksheets :3Study Guides :1
Multi-step Word ProblemsSome word problems require more than one step to solve. These are called multi-step word problems. Read more...iWorksheets :4Study Guides :1
DivisionDivide three-digit numbers by one- and two-digit numbers. Read more...iWorksheets :6Study Guides :1Vocabulary :1
Commutative/Associative PropertiesUsing the Commutative Property in addition means that the order of addends does not matter; the sum will remain the same. Read more...iWorksheets :3Study Guides :1
Word ProblemsMultiply and divide, writing number sentences. Read more...iWorksheets :4Study Guides :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
More MultiplicationMultiplication of two digits by two digits. What Is Multiplication? Multiplication is a short way of adding or counting. Multiplication is a faster way of adding. By multiplying numbers together, you are adding a series of one number to itself. Read more...iWorksheets :3Study Guides :1
MultiplicationWhat Is Multiplication? Multiplication is a short way of adding or counting. Multiplication is a faster way of adding by using strategies to remember what different groups of each number equal. By multiplying numbers together, you are adding a series of one number to itself. The answer to a multiplication problem is called a product. Read more...iWorksheets :10Study Guides :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1
DivisionWhat Is Division? Division is splitting up numbers into equal parts. The process of finding out how many times one number will go into another number. Division is a series of repeated subtraction. The parts of a division problem include the divisor, dividend, quotient and remainder. Read more...iWorksheets :8Study Guides :1
Division/MultiplicationUnderstanding of models for multiplication, place value, and properties of operations (in particular, the distributive property). Read more...iWorksheets :9Study Guides :1
MultiplicationMultiplication is similar to adding a number to itself a certain number of times. When multiplying an odd number with an odd number, the product is always an odd number. When multiplying an odd number with an even number or two even numbers, the product is always an even number. Read more...iWorksheets :19Study Guides :1
DivisionFreeWhat Is Division? Division is an operation that tells: how many equal sized groups, how many in each group. The number you divide by is called the DIVISOR. The number you are dividing is called the DIVIDEND. And the answer is called the QUOTIENT. Read more...iWorksheets :6Study Guides :1
4.4 (C) Recall and apply multiplication facts through 12 x 12. Supporting Standard (STAAR)
MultiplicationMultiplication is similar to adding a number to itself a certain number of times. When multiplying an odd number with an odd number, the product is always an odd number. When multiplying an odd number with an even number or two even numbers, the product is always an even number. Read more...iWorksheets :19Study Guides :1
4.4 (D) Use multiplication to solve problems (no more than two digits times two digits without technology). Readiness Standard (STAAR)
MultiplicationMultiplication is one of the four elementary, mathematical operations of arithmetic. Read more...iWorksheets :7Study Guides :1Vocabulary :1
Odd/EvenA number can be identified as odd or even. Odd numbers can't be divided exactly by 2. Read more...iWorksheets :3Study Guides :1
DivisionDivide three-digit numbers by one- and two-digit numbers. Read more...iWorksheets :6Study Guides :1Vocabulary :1
Commutative/Associative PropertiesUsing the Commutative Property in addition means that the order of addends does not matter; the sum will remain the same. Read more...iWorksheets :3Study Guides :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
More MultiplicationMultiplication of two digits by two digits. What Is Multiplication? Multiplication is a short way of adding or counting. Multiplication is a faster way of adding. By multiplying numbers together, you are adding a series of one number to itself. Read more...iWorksheets :3Study Guides :1
MultiplicationWhat Is Multiplication? Multiplication is a short way of adding or counting. Multiplication is a faster way of adding by using strategies to remember what different groups of each number equal. By multiplying numbers together, you are adding a series of one number to itself. The answer to a multiplication problem is called a product. Read more...iWorksheets :10Study Guides :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1
Division/MultiplicationUnderstanding of models for multiplication, place value, and properties of operations (in particular, the distributive property). Read more...iWorksheets :9Study Guides :1
MultiplicationMultiplication is similar to adding a number to itself a certain number of times. When multiplying an odd number with an odd number, the product is always an odd number. When multiplying an odd number with an even number or two even numbers, the product is always an even number. Read more...iWorksheets :19Study Guides :1
4.4 (E) Use division to solve problems (no more than one-digit divisors and three digit dividends without technology). Readiness Standard (STAAR)
DivisionDivide three-digit numbers by one- and two-digit numbers. Read more...iWorksheets :6Study Guides :1Vocabulary :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1
DivisionWhat Is Division? Division is splitting up numbers into equal parts. The process of finding out how many times one number will go into another number. Division is a series of repeated subtraction. The parts of a division problem include the divisor, dividend, quotient and remainder. Read more...iWorksheets :8Study Guides :1
Division/MultiplicationUnderstanding of models for multiplication, place value, and properties of operations (in particular, the distributive property). Read more...iWorksheets :9Study Guides :1
DivisionFreeWhat Is Division? Division is an operation that tells: how many equal sized groups, how many in each group. The number you divide by is called the DIVISOR. The number you are dividing is called the DIVIDEND. And the answer is called the QUOTIENT. Read more...iWorksheets :6Study Guides :1
(4.5) Number, operation, and quantitative reasoning. The student estimates to determine reasonable results. The student is expected to:
4.5 (A) Round whole numbers to the nearest ten, hundred, or thousand to approximate reasonable results in problem situations. Supporting Standard (STAAR)
EstimationFreeEstimation is an approximate calculation. Read more...iWorksheets :4Study Guides :1
EstimationFreeTo estimate means to make an educated guess based on what you already know. Read more...iWorksheets :4Study Guides :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1
4.5 (B) Use strategies including rounding and compatible numbers to estimate solutions to multiplication and division problems. Supporting Standard (STAAR)
EstimationFreeEstimation is an approximate calculation. Read more...iWorksheets :4Study Guides :1
PercentsWhen there are one HUNDRED equal parts of something, you can find a PERCENT. Read more...iWorksheets :3Study Guides :1
Rounding NumbersWhat Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1
Add/Subtract FractionsWhat Is Addition and Subtraction of Fractions? Addition is combining two or more fractions. The term used for addition is plus. When two or more numbers, or addends, are combined they form a new number called a sum. Subtraction is “taking away” one fraction from another fraction. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :4Study Guides :1

Reporting Category 2: Patterns, Relationships, and Algebraic Reasoning - The student will demonstrate an understanding of patterns, relationships, and algebraic reasoning.

(4.6) Patterns, relationships, and algebraic thinking. The student uses patterns in multiplication and division. The student is expected to:
4.6 (A) Use patterns and relationships to develop strategies to remember basic multiplication and division facts (such as the patterns in related multiplication and division number sentences (fact families) such as 9 x 9 = 81 and 81 / 9 = 9). Supporting Standard (STAAR)
MultiplicationMultiplication is similar to adding a number to itself a certain number of times. When multiplying an odd number with an odd number, the product is always an odd number. When multiplying an odd number with an even number or two even numbers, the product is always an even number. Read more...iWorksheets :19Study Guides :1
DivisionFreeWhat Is Division? Division is an operation that tells: how many equal sized groups, how many in each group. The number you divide by is called the DIVISOR. The number you are dividing is called the DIVIDEND. And the answer is called the QUOTIENT. Read more...iWorksheets :6Study Guides :1
4.6 (B) Use patterns to multiply by 10 and 100. Supporting Standard (STAAR)
Division/MultiplicationUnderstanding of models for multiplication, place value, and properties of operations (in particular, the distributive property). Read more...iWorksheets :9Study Guides :1

Reporting Category 3: Geometry and Spatial Reasoning - The student will demonstrate an understanding of geometry and spatial reasoning.

(4.8) Geometry and spatial reasoning. The student identifies and describes attributes of geometric figures using formal geometric language. The student is expected to:
4.8 (A) Identify and describe right, acute, and obtuse angles. Supporting Standard (STAAR)
Lines and AnglesAcute angle: An angle whose measure is less than 90; Right angle: An angle that measures 90; Obtuse angle: An angle whose measure is more than 90 and less than 180; Straight angle: An angle that measures 180; Reflex angle: An angle whose measure is more than 180 and less than 360. There are 3 sets of lines: Intersecting, Perpendicular and Parallel. Read more...iWorksheets :12Study Guides :2Vocabulary :2
MeanA mean of a group of numbers is the average of those numbers. Read more...iWorksheets :3Study Guides :1
AnglesA right angle is an angle that measures 90°. A straight angle is an angle that measures 180°. An obtuse angle is an angle that measures more than 90°. An acute angle is an angle that measures less than 90°. Read more...iWorksheets :10Study Guides :1
4.8 (B) Identify and describe parallel and intersecting (including perpendicular) lines using concrete objects and pictorial models. Supporting Standard (STAAR)
Lines and AnglesAcute angle: An angle whose measure is less than 90; Right angle: An angle that measures 90; Obtuse angle: An angle whose measure is more than 90 and less than 180; Straight angle: An angle that measures 180; Reflex angle: An angle whose measure is more than 180 and less than 360. There are 3 sets of lines: Intersecting, Perpendicular and Parallel. Read more...iWorksheets :12Study Guides :2Vocabulary :2
4.8 (C) Use essential attributes to define two- and three-dimensional geometric figures. Readiness Standard (STAAR)
ShapesWe are surrounded by many different kinds of shapes every day. Many shapes are flat. These shapes are two-dimensional plane figures. Read more...iWorksheets :10Study Guides :1
ShapesFreeA shape is the external contour or outline of someone of something Read more...iWorksheets :11Study Guides :1Vocabulary :3
Polygon CharacteristicsA polygon is a plane figure with at least three straight sides and angles, and typically five or more. Read more...iWorksheets :8Study Guides :1Vocabulary :1
Solids and FacesYou can use solid shapes to help describe real-world objects. These shapes have surfaces called faces. Read more...iWorksheets :5Study Guides :1
MeanA mean of a group of numbers is the average of those numbers. Read more...iWorksheets :3Study Guides :1
Congruent ShapesFreeCongruent shapes are shapes that are the exact same shape and size. Congruent shapes can be rotated or reflected. When 2 shapes are congruent, they have the exact same size and shape. Read more...iWorksheets :4Study Guides :1Vocabulary :1
(4.9) Geometry and spatial reasoning. The student connects transformations to congruence and symmetry. The student is expected to:
4.9 (C) Use reflections to verify that a shape has symmetry. Supporting Standard (STAAR)
SymmetrySymmetry is an exact matching of two parts along a fold line. Read more...iWorksheets :4Study Guides :1
(4.10) Geometry and spatial reasoning. The student recognizes the connection between numbers and their properties and points on a line. The student is expected to:
4.10 (A) Locate and name points on a number line using whole numbers, fractions such as halves and fourths, and decimals such as tenths. Readiness Standard (STAAR)
Number LineA number line is a line that shows any group of numbers in their least to greatest value. Read more...iWorksheets :3Study Guides :1

Reporting Category 4: Measurement - The student will demonstrate an understanding of the concepts and uses of measurement.

(4.11) Measurement. The student applies measurement concepts. The student is expected to estimate and measure to solve problems involving length (including perimeter) and area. The student uses measurement tools to measure capacity/volume and weight/mass. The student is expected to:
4.11 (A) Estimate and use measurement tools to determine length (including perimeter), area, capacity and weight/mass using standard units SI (metric) and customary. Readiness Standard (STAAR)
MeasurementMeasurement is the assignment of a number to a characteristic of an object or event, which can be compared with other objects or events. Read more...iWorksheets :8Study Guides :1Vocabulary :3
MeasurementFreeThere are two system of measurement for length that can be used. U.S customary System and Metric System. U.S. Customary System & Metric system. Read more...iWorksheets :10Study Guides :1Vocabulary :3
Volume and CapacityWhat is volume? Volume is the 3-dimensional size of an object, such as a box. What is capacity? Capacity is the amount a 3-dimensional object can hold or carry. It can also be thought of the measure of volume of a 3-dimensional object. Read more...iWorksheets :5Study Guides :1
AreaArea is the number of square units needed to cover a flat surface. Read more...iWorksheets :3Study Guides :1
Units of MeasureWhen you need to measure an object, you must decide if you are: Measuring in length, weight, or capacity, choosing the unit that makes sense to measure the object, Measuring in the customary system or the metric system. Read more...iWorksheets :3Study Guides :1
Area and PerimeterThe area of a figure is the space inside the figure. The perimeter of a polygon is the distance around it. The perimeter is the sum of the lengths of ALL the sides. Read more...iWorksheets :7Study Guides :1
MeanA mean of a group of numbers is the average of those numbers. Read more...iWorksheets :3Study Guides :1
MeasurementMeasurement is the use of units to show size, length, weight, or capacity.There are customary measurements and metric measurements. Read more...iWorksheets :13Study Guides :1Vocabulary :2
Units of MeasureWhat are Units of Measurement? People measure mass, volume, and length. These measurements are labeled with appropriate unit of measurement. Read more...iWorksheets :4Study Guides :1
Determine Appropriate Standard of UnitsWhat are the Standard of Units? When measuring objects or distances, there are certain measurements of length, distance, weight, and capacity that should be used. There are customary standard of units and metric standard of units. Read more...iWorksheets :3Study Guides :1
4.11 (C) Use concrete models of standard cubic units to measure volume. Supporting Standard (STAAR)
Volume and CapacityWhat is volume? Volume is the 3-dimensional size of an object, such as a box. What is capacity? Capacity is the amount a 3-dimensional object can hold or carry. It can also be thought of the measure of volume of a 3-dimensional object. Read more...iWorksheets :5Study Guides :1
MeanA mean of a group of numbers is the average of those numbers. Read more...iWorksheets :3Study Guides :1
4.11 (E) Explain the difference between weight and mass. Supporting Standard (STAAR)
MeasurementMeasurement is the assignment of a number to a characteristic of an object or event, which can be compared with other objects or events. Read more...iWorksheets :8Study Guides :1Vocabulary :3
MeasurementFreeThere are two system of measurement for length that can be used. U.S customary System and Metric System. U.S. Customary System & Metric system. Read more...iWorksheets :10Study Guides :1Vocabulary :3
Units of MeasureWhen you need to measure an object, you must decide if you are: Measuring in length, weight, or capacity, choosing the unit that makes sense to measure the object, Measuring in the customary system or the metric system. Read more...iWorksheets :3Study Guides :1
MeanA mean of a group of numbers is the average of those numbers. Read more...iWorksheets :3Study Guides :1
MeasurementMeasurement is the use of units to show size, length, weight, or capacity.There are customary measurements and metric measurements. Read more...iWorksheets :13Study Guides :1Vocabulary :2
Units of MeasureWhat are Units of Measurement? People measure mass, volume, and length. These measurements are labeled with appropriate unit of measurement. Read more...iWorksheets :4Study Guides :1
Determine Appropriate Standard of UnitsWhat are the Standard of Units? When measuring objects or distances, there are certain measurements of length, distance, weight, and capacity that should be used. There are customary standard of units and metric standard of units. Read more...iWorksheets :3Study Guides :1
(4.12) Measurement. The student applies measurement concepts. The student measures time and temperature (in degrees Fahrenheit and Celsius). The student is expected to:
4.12 (A) Use a thermometer to measure temperature and changes in temperature. Supporting Standard (STAAR)
TemperatureWhat Is Temperature? Temperature is the measure of how hot or cold something is. Temperature is measured with a thermometer. Temperature is measured in degrees Celsius (ºC) or degrees Fahrenheit (ºF). Read more...iWorksheets :3Study Guides :1
4.12 (B) Use tools such as a clock with gears or a stopwatch to solve problems involving elapsed time. Supporting Standard (STAAR)
TimeFreeCalculate elapsed time in hours and half hours, not crossing AM/PM. Read more...iWorksheets :9Study Guides :1
CalendarWhat Is Elapsed Time? Elapsed time is the amount of time from the start of an activity to the end of the activity. It tells how long an activity lasted. Elapsed time can be measured in seconds, minutes, hours, days or weeks. Read more...iWorksheets :3Study Guides :1
Elapsed TimeElapsed time is the amount of time that has passed between two defined times. Read more...iWorksheets :6Study Guides :1

Reporting Category 5: Probability and Statistics - The student will demonstrate an understanding of probability and statistics.

(4.13) Probability and statistics. The student solves problems by collecting, organizing, displaying, and interpreting sets of data. The student is expected to:
4.13 (B) Interpret bar graphs. Readiness Standard (STAAR)
Represent DataYou can represent data by bar graphs, pictographs and tables. Read more...iWorksheets :7Study Guides :1
Graphs and ChartsWhat Are Graphs? A way to show information in the form of shapes or pictures. Graphs show the relationship between two sets of information. There are many different types of graphs. A few of them include bar graphs, line graphs, pictographs, and circle graphs. Read more...iWorksheets :10Study Guides :1Vocabulary :1
Tables and GraphsWhat Are Bar, Circle, and Line Graphs? Bar Graphs are used to compare data. A bar graph is used to show relationships between groups. Circle Graphs are also known as Pie graphs or charts. They consist of a circle divided into parts. Line Graphs show gradual changes in data. Read more...iWorksheets :9Study Guides :1

Standards

NewPath Learning resources are fully aligned to US Education Standards. Select a standard below to view correlations to your selected resource:

Texas Assessments of Academic Readiness (STAAR)Alabama Courses of StudyAlaska Content and Performance StandardsArizona's College and Career Ready StandardsArkansas Curriculum FrameworksCalifornia Content StandardsColorado Academic Standards (CAS)Common Core State StandardsConnecticut Core StandardsDelaware Standards and InstructionFlorida StandardsGeorgia Standards of ExcellenceHawaii Content and Performance StandardsIdaho Content StandardsIllinois Learning StandardsIndiana Academic StandardsIowa CoreKansas Academic StandardsKentucky Academic StandardsLouisiana Academic StandardsMaine Learning ResultsMaryland College and Career-Ready StandardsMaryland StandardsMassachusetts Curriculum FrameworksMichigan Academic StandardsMinnesota Academic StandardsMississippi College & Career Readiness StandardsMissouri Learning StandardsMontana Content StandardsNational STEM StandardsNebraska Core Academic Content StandardsNevada Academic Content StandardsNew Hampshire College and Career Ready StandardsNew Jersey Common Core StandardsNew Jersey Student Learning StandardsNew Mexico Content StandardsNew York State Learning Standards and Core CurriculumNorth Carolina Standard Course of StudyNorth Dakota Academic Content StandardsOhio Learning StandardsOklahoma Academic StandardsOregon Academic Content StandardsPennsylvania Core and Academic StandardsRhode Island World-Class StandardsSouth Carolina Standards & LearningSouth Dakota Content StandardsTennessee Academic StandardsTexas Essential Knowledge and Skills (TEKS)U.S. National StandardsUtah Core StandardsVermont Framework of Standards and LearningVirgin Islands Common Core StandardsVirginia Standards of LearningWashington DC Academic StandardsWashington State K–12 Learning Standards and GuidelinesWest Virginia College and Career Readiness StandardsWisconsin Academic StandardsWyoming Content and Performance Standards